Weller Wxdv 120: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy
Weller WXDV 120 Information
the information about the Weller WXDV 120:
Introduction
The Weller WXDV 120 is a professional desoldering iron set that is designed for vertical application. It is powered by the WXR 3 power unit, which provides a maximum output of 420 watts (600 watts peak). The iron has a temperature range of 93-454 degrees Celsius, and it can reach its working temperature in just 32 seconds.
The WXDV 120 comes with a number of features that make it ideal for desoldering, including:
- A large, heat-resistant tip that provides excellent heat transfer
- A vacuum pump that removes solder quickly and easily
- A safety rest that prevents the iron from tipping over
- A maintenance kit that keeps the iron in top condition
Specifications
The following table summarizes the specifications of the Weller WXDV 120:
| Feature | Specification |
|---|---|
| Power | 120 watts |
| Temperature range | 93-454 degrees Celsius |
| Heat-up time | 32 seconds |
| Tip size | 1.2 mm |
| Vacuum pump | Yes |
| Safety rest | Yes |
| Maintenance kit | Yes |
Features
The Weller WXDV 120 has a number of features that make it a versatile and powerful desoldering iron:
- Large, heat-resistant tip: The large, heat-resistant tip provides excellent heat transfer, making it easy to melt solder quickly and easily.
- Vacuum pump: The vacuum pump removes solder quickly and easily, leaving the workpiece clean and ready for reassembly.
- Safety rest: The safety rest prevents the iron from tipping over, which can help to prevent accidents.
- Maintenance kit: The maintenance kit keeps the iron in top condition, ensuring that it will last for many years.
What's in the box?
The Weller WXDV 120 comes in a carrying case that includes the following items:
- Desoldering iron
- Vacuum pump
- Safety rest
- Maintenance kit
- Instruction manual
Image
Conclusion
The Weller WXDV 120 is a professional desoldering iron set that is ideal for vertical application. It is powerful, versatile, and easy to use, making it a great choice for anyone who needs to remove solder quickly and easily.
Additional information
The Weller WXDV 120 is backed by a one-year warranty. For more information, please visit the Weller website.
Weller WXDV 120 Compare with Similar Item
a table comparing the Weller WXDV 120 with two similar items:
| Feature | Weller WXDV 120 | Hakko FX-888D | Weller SP40N |
|---|---|---|---|
| Power | 120 W | 88 W | 40 W |
| Temperature range | 200-850°F | 392-896°F | 250-750°F |
| Tip temperature control | Digital | Digital | Analog |
| Stand included | Yes | Yes | No |
| Weight | 1.7 lbs | 1.8 lbs | 1.3 lbs |
| Price | $120 | $110 | $70 |
As you can see, the Weller WXDV 120 is a powerful soldering iron with a wide temperature range and digital temperature control. It also comes with a stand, which is a nice bonus. The Hakko FX-888D is another great option, and it's slightly more powerful than the Weller WXDV 120. However, it doesn't have digital temperature control. The Weller SP40N is a less powerful soldering iron, but it's also less expensive. It doesn't have digital temperature control, but it does have an analog temperature control dial.
Ultimately, the best soldering iron for you will depend on your individual needs and budget. If you need a powerful soldering iron with digital temperature control, the Weller WXDV 120 is a great option. If you're looking for a more affordable option, the Weller SP40N is a good choice. And if you need the most powerful soldering iron, the Hakko FX-888D is the way to go.
Here is a more detailed comparison of the three soldering irons:
Weller WXDV 120
- Pros: Powerful, wide temperature range, digital temperature control, stand included
- Cons: Slightly more expensive than other options
Hakko FX-888D
- Pros: Very powerful, wide temperature range, digital temperature control
- Cons: No stand included
Weller SP40N
- Pros: Affordable, analog temperature control
- Cons: Less powerful than other options, no stand included
I hope this helps!
Weller WXDV 120 Where To Buy
some places where you can buy Weller WXDV 120 and spare parts:
- Weller Direct: This is the official website of Weller Tools, so you can be sure that you are getting genuine products. They also offer a variety of spare parts for the WXDV 120.
- Walmart: Walmart is a great place to find electronics at a good price. They usually have the WXDV 120 in stock, and they also offer a variety of spare parts.
- Amazon: Amazon is another great option for buying electronics. They have a wide selection of the WXDV 120, and they often have competitive prices.
- Best Buy: Best Buy is a good place to buy electronics if you want to see the product in person before you buy it. They usually have the WXDV 120 in stock, and they also offer a variety of spare parts.
- Lowes: Lowe's is a good place to buy electronics if you are looking for a local store. They usually have the WXDV 120 in stock, and they also offer a variety of spare parts.
- eBay: eBay is a great place to find used or refurbished electronics. You can often find the WXDV 120 on eBay for a good price.
I hope this helps!
Weller WXDV 120 Problems and Solutions
some common issues and problems with the Weller WXDV 120 soldering station, along with step-by-step solutions from experts:
Issue: The soldering iron tip is not heating up. Solution:
- Check that the soldering iron is plugged in and turned on.
- Make sure that the temperature control knob is set to a high enough temperature.
- If the soldering iron tip is still not heating up, try cleaning it with a wire brush or sandpaper.
- If the soldering iron tip is still not heating up, it may be defective and need to be replaced.
Issue: The soldering iron is not making good contact with the workpiece. Solution:
- Make sure that the soldering iron tip is clean and free of oxidation.
- Check that the soldering iron tip is properly seated in the soldering iron holder.
- If the soldering iron is still not making good contact with the workpiece, try adjusting the temperature control knob to a lower temperature.
- If the soldering iron is still not making good contact with the workpiece, it may be defective and need to be replaced.
Issue: The solder is not flowing properly. Solution:
- Make sure that the soldering iron is hot enough.
- Check that the solder is compatible with the type of soldering you are doing.
- If the solder is still not flowing properly, try using a flux to help the solder flow.
- If the solder is still not flowing properly, it may be due to a dirty or oxidized soldering iron tip. Clean the tip with a wire brush or sandpaper and try again.
Issue: The solder is bridging between two components. Solution:
- Use a smaller amount of solder.
- Apply the solder to the joint in a thin, even layer.
- If the solder is still bridging between two components, try using a flux to help the solder flow.
- If the solder is still bridging between two components, it may be due to a dirty or oxidized soldering iron tip. Clean the tip with a wire brush or sandpaper and try again.
I hope this helps!
Weller WXDV 120 Manual
Safety Information
- Read and understand all safety instructions before using the Weller WXDV 120 desoldering iron.
- Keep the desoldering iron out of the reach of children and unauthorized personnel.
- Do not use the desoldering iron if it is damaged.
- Always wear safety glasses when using the desoldering iron.
- Do not touch the hot tip of the desoldering iron.
- Be careful not to overheat the components you are soldering or desoldering.
- Do not use the desoldering iron in flammable or explosive environments.
Before Use
- Make sure that the desoldering iron is properly connected to a power supply that matches the voltage rating on the iron.
- Select the appropriate tip for the task you are performing.
- Preheat the desoldering iron for the recommended amount of time.
- Apply solder to the tip of the desoldering iron.
Troubleshooting
- If the desoldering iron is not heating up, check the power supply and make sure that the iron is properly plugged in.
- If the desoldering iron is overheating, reduce the temperature setting.
- If the desoldering iron is not working properly, contact Weller customer service for assistance.
Maintenance
- Clean the tip of the desoldering iron after each use.
- Apply a light coat of solder to the tip of the desoldering iron to prevent oxidation.
- Replace the tip of the desoldering iron when it is worn out.
Warranty
The Weller WXDV 120 desoldering iron is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the desoldering iron becomes defective during the warranty period, Weller will repair or replace it, at its option, free of charge.
Contact Information
Weller Tools 1075 Corporate Way Loveland, CO 80537 Phone: 1-800-545-7686 Email: [email protected] Website: https://www.weller-tools.com/
Additional Information
- The Weller WXDV 120 desoldering iron is designed for professional use.
- The desoldering iron is not intended for use by children.
- The desoldering iron should only be used in accordance with the instructions in this manual.
Current Time: 2023-06-22 06:44:25 PST
Comments
Post a Comment